How to Install Centre Fin on Your Hard Paddle Board

The centre fin on your board is what influences maneuverability and stability, we’ve broken down how to install your centre fin in 4 easy steps.


You will need: 

Taiga board - Paddle board, center fin, fin key


Step 1 

Remove the screw from the centre fin, and slide the aluminium plate to the front of the fin box, towards the nose of the board.

Taiga board - Install center fin 1

Step 2 

Insert the fin base into the fin box slot and slide to the rear of the fin box. The tip of the fin should point towards the tail of the board.

Taiga board - Install center fin 2

Step 3 

Slide the aluminium plate so that the hole is aligned with the screw hole of the centre fin.

Taiga board - Install center fin 3

Step 4 

Once aligned, screw your fin tightly into the aluminium plate so that you don’t lose it when paddling.

Taiga board - Install center fin 4

Ambassador tip 

The further back you place the central fin, the more your paddle board will go in a straight line. If you push the fin towards the front of the board, the easier your board will be to maneuver.

Article précédant Article suivant

Item is added to cart
ENGLISH